GHOST GH100F
8
2.5 DMX MODE
When the LCD panel display “READY TO FAZER”, press the FUNCTION button and select DMX512 mode.
Under this mode, user can use either the UP/DOWN button will be able to set the DMX address. The GHOST
GH100F haze machine provide two channels one for the fan and the other is for fog output.
2.7 CONNECTION OF THE DMX LINE
DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-
ance and low capacity.
The following diagram shows the connection mode:
DMX - OUTPUT
XLR socket
DMX - INPUT
XLR plug
Pin1 : GND - Shield
Pin2 : - Negative
Pin3 : + Positive
Pin4 : N/C
Pin5 : N/C
Fig.3
2.6 ADJUSTING THE START ADDRESS
To able to operate the GHOST GH100F with a controller, adjust the DMX start address for first DMX chan-
nel. If e.g. address 33 on the controller is provided for controlling the function of the first DMX channel,
adjust the start address 33 on the GHOST GH100F. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
2
33
33-34
35
37
39
CH Function in 2 channels mode
Value
1
FAN CONTROL
Slow
Medium
Fast
000 - 085
086 - 170
171 - 255
2
SMOKE OUTPUT
No function
Smoke 5 - 100%
000 - 005
006 - 255
