ProLights Fury FY700S, Руководство пользователя

Страница: 49 / 56

21
FURY FY700S
3.13 FIXTURE SETTINGS
It is possible to change the parameter value in the following way:
Setting functions
• Press the MODE/ESC button to enter the main menu and scroll using UP/DOWN button to select
the desired function, then press ENTER button.
• Press ENTER button to confirm the choice.
- [PAN REVERSE] - Reverse PAN movement. Select ( NORMAL/ REVERSE ) for normal/inverted control of
the PAN function.
- [TILT REVERSE] - Reverse TILT movement. Select ( NORM/ REVERSE ) for normal/inverted control of the
TILT function.
- [DISPLAY] - Time for display backlight. Select ( BRIGHT - 30 CLOSE ) for length of time for diplay
backlight. In the "30 CLOSE" mode the background lighting will turn off after 30 seconds id no
buttons are pushed.
- [PAN ANGLE] - Restrict the pan angles. Select either [540] , [360] or [180] . (For built-in program only)
-
[TILT ANGLE]
- Restrict the tilt angles. Select either
[270]
,
[180]
or
[90]
. (For built-in program only)
- [TEMP. DISP] - Independent temperature of each LED (T1, T2, T3).
- [RESET SYSTEM] - Whole machine reset. Select [OK] or [NO] (no Reset).
- [LOAD SET] - Load original state. Select [OK] or [NO] (unload).
• Press the MENU button to go back or wait some seconds for automatic exit from the menu.
Setting service functions
The FURY FY700S contains a password-protected mode which allows you to calibrate and trouble-
shoot any small issues you may have during normal operation. In order to access this mode, do the
following:
• Press and hold the button MODE/ESC for at least 10 seconds.
• Use the UP/DOWN buttons to enter the password: [2323] . Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
In this mode you have several options for adjustment.
• Press UP/DOWN button to select PAN INIT, TILT INIT, COLOR INIT, GOBO1 INIT, GROTA INIT, GOBO2 INIT, FOCUS INIT,
PRISMA INIT, IRIS INIT, LAMP INIT
.
• Press ENTER button to confirm the choice.
• Use the UP/DOWN button to select the desired value ( 000-255 ).
• Press ENTER button to confirm the setting.
In order to access this mode, do the following:
• Press and hold the button MODE/ESC for at least 10 seconds.
• Use the UP/DOWN buttons to enter the password: [2322] . Press ENTER to confirm the access.
NOTE - Press the button DOWN to navigate the digit. Press the button UP to navigate the value.
• Press UP/DOWN button to select PRISM HALF e FOCUS HALF .
• Press ENTER button to confirm the choice.
• Use the UP/DOWN button to select the desired value ( 000-255 ).
• Press ENTER button to confirm the setting.