ProLights EclExpo Flood300VW, Руководство пользователя

Страница: 15 / 28

PROLIGHTS - EclExpo
Flood300VW 13
9 - MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in
BOLD
indicates the
default settings.
MENU
1 CONNECT
DMX
ADDRESS
001
-512
Choose DMX Address
DMX MODE UNO COLOR
TEMPERATURE
2700K Choose DMX Mode
2800K
3000K
3200K
3500K
4000K
4500K
5000K
5600K
6000K
6500K
MANUAL
COLOR
WARM WHITE 0-255
COLD WHITE 0-255
DUO
BASIC
STANDARD
EXTENDED
WIRELESS WDMX
ON/OFF
Enable/Disable the wireless card.
WDMX mode On-
Off
Allows to choose whether to set the wireless on the
Transmitter or Receiver.
WDMX mode is unlocked only if WDMX ON / OFF is ON.
TX link Transmitter
Receiver
TX link unlock when the unit is set as a transmitter..
TX unlink On-
Off
Disconnect the transmitter from all receivers.
TX unlink unlocks only if WDMX mode is on transmitter.
RX reset On-
Off
Total reset of the receiver.
RX reset unlocks only if WDMX mode is receiver.
DMX to WDMX
(TX)
On- Off Enable/Disable the transmission of the dmx from the
transmitter to the receiver via wdmx.
WDMX to DMX
(RX)
On
-Off Enable/Disable the retransmission of the DMX from the
receiver to the other units connected by cable to the re -
ceiver itself.
2 SETUP
SCREEN BACKLIGHT ON Allows you to select the timing after that display will
switch automatically off when unactive.
10 s
20 s
30 s
FLIP DISPLAY ON Allows you to rotate the display by 180°.
OFF
KEY LOCK ON Allows you lock the buttons on the control panel by a
password.
Press following combinations (password) in order to ac -
cess to the user menu : UP, DOWN, UP, DOWN, ENTER,
OFF
TEMPERATURE
UNIT
°C
To choose the desired unit of temperature measurement.
°F
TRANSFER
SETTINGS
WITHOU DMX
ADDRESS
To transfer the same menu settings of one fixtures to all
the other in the daisy chain, including or not the dmx
address.
WITH DMX
ADDRESS