ProLights DTD no. 521-7135, Руководство пользователя

Страница: 33 / 44

11
DIAMOND152
Where the function is described as a “Sound activated” function, the movements of the laser beam are
music-controlled via the microphone (15)
For music control adjust the control SENSITIVITY (16) for the microphone sensitivity so that the dynamic
power of the music will be reproduced in an optimum way by the movements of the laser. When changing
the pattern or the movement by a music signal, the LED (3) shortly lights up.
NOTE: when changing the volume of the music system, the microphone sensitivity must be adapted ac-
cordingly via the rotary control.
3.5 Slave mode
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave with the same effect. To get a
perfect program synchrony each unit has to have the same DMX address.
• Press the button FUNC so many times until the display shows [
SLA
] (fig.6).
• Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units. For longer cable runs we suggest a terminator at the last fixture (see page 13).
Display Function
AUN
Auto running mixed show, Pattern Grating effect
Sod
Sound activated grating effect show
Aud
Auto running grating effect show
Sop
Sound activated pattern effect show
AUP
Auto running pattern effect show
SoN
Sound activated mixed show, Pattern Grating effect
Fig.6