LEDJ RAINBOW TUBE CONTROLLER
PROGRAMMES
Programmes
1
Dimmer
12
Slow Flow 2
2
Blackout
13
Roll Chase 1
3
Static Red
14
Roll Chase 2
4
Static Green
15
Multi-Colour
5
Static Yellow
16
Fast Flow 1
6
Static Blue
17
Fast Flow 2
7
Static Purple
18
2 colour Chase
8
Static Cyan
19
2 Colour Flow
9
Static White
20
Colour Fade
10
Colour Changing
21
Auto Run
11
Slow Flow 1
22
Tube Set-up
1. Press the Set up Button in any of the 22 modes, followed by the
Up
&
Down
to control. R xx , G xx, B xx.
Select R,G,B Dimming by pressing the
UP
and
DOWN
key.
• Select Run Speed: 1 – 100
• Select Flash Freq: 1 – 100
• Colour type: Select 2 colour Flow or 2 Colour Chase (range: 0 – 20)
• Unit times: Running times for each type of display in auto-run mode.
• Set address: (Yes): Please set sequential addressing for all of the Rainbow Tubes
(set address when starting up for the first time, or amending array order, or
quantity minus or plus so as to get the correct display) The address will be stored
in the Rainbow Tube once it is set.
• Very large arrays and patterns of Rainbow Tubes can be created by using multiple
Rainbow Tube Controllers and setting the start address to follow on from the finish
address of the previous controller.
• DMX Channel: (0): No DMX control, via the Keypad on the top of the Controller.
