15 16
d) The rapid detection of water shortage function is cancelled after pressing the OFF
button.
2. Continuous working protection function
In the default operating state after startup, when the appliance has been working
continuously for 15 hours without any button pressed, it turns off automatically; If the
user wants to deactivate this function, please press and hold the
COOLER/HUMIDIFIER
and
SPEED
button for 3s, then a beep sound is given by the buzzer to indicate the
automatic shutdown function is deactivated.
3. Heating protection function
When the horizontal blades are closed by accident during heating state, the heating
system stops working when the temperature reaches at a high point to prevent the blades
from being deformed or the appliance being burned.
⚫
Water filling:
Please add suitable water to the water tank before attempting to use the cooling/
humidifying function, and
it’s necessary to firstly open the tank lock,
half/completely take
out the tank and fill water, and then re-lock the tank, see the below figure:
Please pay attention to the water level marked on the water tank.
1. Do not exceed the maximum level or below the minimum level.
2. Please be sure to use clean water.
V. Cleaning and Maintenance
Do not use chemical detergents when cleaning.
Please unplug the power cord, otherwise it may cause electric shock.
◼
When there is accumulated dust on the surface, please wipe it with a soft cloth or
water below 50
℃
mixed with neutral detergent and let it dry in the air.
◼
I
t’s prohibited
using any substances that may damage the outer surface.
● Clean
ing of filters
Please clean these filters once a month when dust and other particles accumulated on
them, otherwise it will affect the cooling/ purifying effect.
