PROKORD DF-AF1838KH, Руководство пользователя

Страница: 7 / 10

11 12
1 2 3 4
A
B
C
D
4 3 2 1
D
C
B
A
Title
Nu mber Rev isio n Size
A4
Date: 2 8-Mar-2 0 05 Sheet o f
File: D:\Myd esign \DF1 88 K.d d b Drawn By:
高速 风
中速 风
低速 风
停 止
强
中
弱
6S 6S 6S 3S 12S 12S 3S 6S 15S 3S
T=90S
DF-188K
自然 风模式
KMIN
6S 6S 6S 6S 6S 6S 3S 12S
6S 6S 12S 6S 6S 6S 6S 6S 6S
6S 12S 6S 3S 6S
3S 6S 3S
T=90S
T=90S
高速 风
中速 风
低速 风
停 止
高速 风
中速 风
低速 风
停 止
1 1
6S
6S 6S 6S
6S 6S 6S
Sleeping wind : Operate at the speed set by the user and reduces the speed according
to the preset rules. This mode prevents people from physical discomfort due to high
speed wind during sleeping. Rules for wind operation in the natural wind mode are as
follows:
- High speed: 30 minutes high natural wind → 30 minutes medium natural wind → low
natural wind
- Medium speed: 30 minutes medium natural wind → low natural wind
- Low speed: Keep operating at low natural wind
-
Smart wind : When the ambient temperature surrounding the appliance is below
25
℃
, operate at a low speed; if between 25
℃
and 29
℃
, operate at a medium speed; if
above 29
℃
, operate at a high speed. (Note: In this mode, the wind speeds cannot be
adjusted, and the wind speed indicators don ’ t change with the speed).
In this mode, the LED indicator icon flashes at 0.5s on/off to indicate the state of smart
wind mode; if press the button at this time, it is exit from the smart wind mode to next
mode wind, and the indicator is no longer flashing.
4. “ TIMER ” button
a) Press the TIMER button continuously to select the running time from 1 to 8 hours in
1-hour increments. During this selection process, the indicator light in the display panel
flashes every 0.5 s. You can also press and hold the TIMER button for 2 s to scroll quickly
every 0.2 s to set the timer value.
b) If you do not press any other button within 5 seconds, the device will start counting
down the specified time and alternately display the remaining time and room
temperature on the display panel.
c) Deactivation: At any time during the countdown, press TIMER and select the timer
value at 0, the device deactivates the timer function and the information screen displays
the information corresponding to the current operating mode.
d) If Timer isn’t set, current ambient temperature is always displayed in “ ℃ ” and the
display range is between -10 to 40 ℃ , ( “ LO ” is displayed when the temperature is -10 ℃
and lower, and “ HI ” is displayed when it is 40
℃
and above). If Timer is set, ambient
temperature is firstly displayed for 5s and then it is switched to display the remaining
Timer value for 5s, which are displayed alternately and cyclically.
5. “ SWING ” button
Press the
SWING
button to activate or stop the automatic left-to-right swing of vertical blades.
(Note: The horizontal blades for up-and-down swing are manually adjusted).
6. “ COOLER/HUMIDIFIER ” button
Press the COOLER/HUMIDIFIER button to activate or stop the cooling/humidifying
function. (Note: Always ensure the tank is filled with suitable water before attempting to
use this function).
7. “ HEATER ” button
a) The main motor keeps running as long as the heating system [PTC (Positive
Temperature Coefficient) board] is in operation. Whenever the heating system stops
working, the main motor continues to work for 30 seconds and then stops.
High-speed wind
Medium-speed
wind
Low-speed wind
Stop
High-speed wind
Medium-speed
wind
Low-speed wind
Stop
High-speed wind
Medium-speed
wind
Low-speed wind
Stop
W
eak
M
ed`
iu
m
St
ro
n
g