10
4.2 ASSEMBLY INSTRUCTION
Step 1. Install Micro-inverter
Mark the approximate center of each photovoltaic module on the frame and install the Micro-
inverter with the logo side facing downwards.
Observe the certification documents concerning the maximum number of
Micro- inverters permitted for installation at each cable section!
The Micro-inverter must be under the module, out of long-term exposure to direct
sunlight or rain.
Step 2. Connect AC Cable of Micro-inverter
Connect the AC cable of the Micro-inverters. The connectors are coupled correctly when two
clicks are heard.
Fig.4. Connect AC Cable of Micro-inverter
Step 3. Protecting Unused Ends
The unused ends of the AC-TRUNK cable must be terminated with the proper end. Fit the
appropriate AC-TRUNK END CAP on the unused ends of the AC-TRUNK cable.
Fig.5. Unused Ends
AC End Cap
