RAM
-4 GB
- 8GB or more
- Virtual Memory: In Win 7, Win 8, Win 10, it is
recommended to use the default option;
"Automatically manage paging le size for all
drives"
Hard Disk
-30 GB of available hard-disk
space for cache
-Temporary le cache requires
about 3GB free disk space for
optimal print le transfers
-SSD or 10,000RPM HDD
Display/GPU
-Open GL 2.1 and GLSL 1.20
enabled graphics card
-Screen resolution 1280x960
-NVidia or AMD GPU with 1GB of RAM or more
-Screen resolution 1280x1024 or higher
Other
-Internet Explorer 9 or newer
-Microsoft .NET Framework 4.5
(installed with application)
-3 button mouse with scroll
-Keyboard
-Google Chrome or Internet Explorer 11
I/O
-Either ethernet or wireless
connection
-Ethernet may be more stable depending on the
facility
Network Interface
The ProJet® 2500 Professional Printing System requires an Ethernet network connection to transfer print jobs from workstation(s) to the printer.
An established TCP/IP network is setup and enabled. An RJ45 Ethernet network connection for each printer to be installed at the delivery site must
be installed, tested and functioning. The printer can use either DHCP or a static assigned IP address. A DHCP server automatically programs an IP
address; otherwise, a network administrator can manually assign a permanent IP address for each printer that is to be connected to the network.
Write IP address(es) here:
___________________________________________________________________
Space Planning
Included in this guide is information and dimensions required to help plan installation of the printer.
Crated Clearance
The 3D printer system is intended to be lifted from the shipping truck using a forklift. Have a forklift available for the 3D Systems Customer Support
Engineer (CSE) or reseller when installation occurs. The crate can then be removed, and the ramps placed as shown below. Store crate pieces where
it will be easy to access should the printer need to be sent back or shipped to another location. Based on the crate size, you must have at least
192”(488mm) (approx. 16’) to accommodate the pallet, ramps and printer, the required footprint to uncrate is approximately 7’ x 16’.(2.13x4.88m)
CAUTION: NEVER unpack, assemble, or connect any component of the shipment without the aid of a quali ed, 3D Systems Customer Support
Engineer or certi ed partner. 3D Systems accepts no responsibility for damaged, defective, or incomplete systems uncrated by anyone other
than 3D Systems Customer Support Engineer or certi ed partner.