ProJet 5500X, Быстрый старт, Страница: 6 / 15

Install Material Bottles
For the purpose of the Demo print , we will use only two bottles of support material and 1.
two bottles of part material . Make certain that the two bottles of part material are the
same type.
Unpack the material bottles and the Global Health and Safety (GHS) Sheet from cartons. 2.
Save sleeves and material carton to store partially used material bottles.
Press and release the upper left material delivery module to open it. Install two bottles of 3.
support material into the MDM. Pull levers up and place bottle down into the holder .
Press on the top of the material bottle until you hear a click to make certain the bottles
are fully seated.
Press and release the upper right material delivery module to open it. Install two bottles 4.
of part material into the MDM. Pull levers up and place bottle down into the holder. Press
on the top of the material bottle until you hear a click to make certain the bottles are fully
seated.
As previously stated, only two MDM are loaded with material for the Demo print . 5.
Subsequent build jobs will require all MDMs to be fully loaded with both support and part
material.