2
INSTRUCTIONS
l
Battery temperature sensor is optional and should be
attached to the service battery
(B1)
l
Assembly sequence of nut, washers and cable lug:
Service Battery
positive (to load)
Run cable to INTELLI-RV system
Keep these cables as short as possible!
Supply cable (included)
Active
shunt
Battery negative
1A Fuse
12V Service
Battery
+B1
CONNECTION DIAGRAM FOR DUAL BATTERY SETUP
Nut
Spring washer
Washer
Cable lug
CONNECTION DIAGRAM FOR SINGLE BATTERY SETUP
Service battery positive
(to load)
Run cable to INTELLI-RV system
Keep these cables
as short as possible!
Battery negative (system ground)
12V, 24V or 48V
Service battery
Starter battery
+B1
+B2
92mm
89mm
46mm
STATUS
NA
NA
NA
NA
NA
P/No. PMSHUNT
Brown & Watson
International Pty. Ltd.
Knoxfield, Victoria 3180
Australia
+B1
Battery 1
+ Battery Sensor
B-
Battery
Negative
S-
Load/Charger
Negative
+B2
Starter Battery
COMM
Connect to
INTELLI-RV
GREEN: OK
RED ON: Over Current >500A
STATUS LED
GREEN:
OK
Red ON:
Over current >500Amp
Note:
Starter battery connection optional as the INTELLI-RV already measures the
starter battery voltage.
NA
More information https://www.caravansplus.com.au
