Projecta HP2012 HP2200 Скачать руководство пользователя страница 3

3

FEATURES

  ENGINE STARTING CAPABILITIES

 HP2012 

The HP2012 is suitable for starting 12V vehicles. 
12V: Petrol vehicles up to 6 litres and diesel vehicles up to 4.5 litres

 HP2200 

The HP2200 is suitable for starting both 12V and 24V vehicles. 
12V: Petrol vehicles up to 6 litres and diesel vehicles up to 4.5 litres 
24V: Petrol & Diesel vehicles up to 7 litres in capacity.

  TOTAL SAFEGUARD PROTECTION

  POLARITY & SURGE PROTECTION 

Prevents sparking from accidental reverse connection, as well as protecting your vehicle 
from spikes in voltage levels.

  CRANKING PROTECTION

 

Prevents your jumpstarter batteries from being over discharged often caused by over 
cranking.

  DISCHARGE PROTECTION 

Discharge protection disconnects power to all 12V accessories when the battery voltage 
reaches low levels.

 

UNDER & OVER VOLTAGE PROTECTION 

The jumpstarter will deactivate and sound an alarm if connected to a battery of  
a different voltage to the setting of the jumpstarter, preventing reverse charge and 
damage to the jumpstarter battery. This feature will also disconnect the jumpstarter  
if the vehicles alternator is malfunctioning with high voltage.

  LCD DIGITAL DISPLAY 

The jumpstarter is fitted with an LCD digital display that displays the batteries state  
of charge, battery voltage mode, correct connection and other warning messages  
during operation.

  HEAVY-DUTY FULLY INSULATED LEADS 

Long 1.6m leads allow easy connection to the vehicles battery while the jumpstarter is 
on the ground. Quality cable ensures optimal performance.

Содержание HP2012 HP2200





















Отзывы: