Projecta HP2012 HP2200, Руководство пользователя, Страница: 16 / 20

16
Q. Why didn’t my jumpstarter start my vehicle?
A. There could be a number of reasons why the jumpstarter did not start your vehicle.
Check the following:
1. Ensure the jumpstarter battery is fully charged. Press the INTERNAL BATTERY
STATUS button to check the condition of the battery (state of charge). Refer to
page 13 (“Checking Battery Capacity”) for further information.
2. Ensure you have followed the correct operating procedure. Refer to page 7
(“Vehicle Jumpstarting Instructions”).
3. Ensure the correct voltage is selected on the jumpstarter for the type of vehicle
being jumpstarted, 12V mode for 12V vehicles & 24V mode for 24V vehicles
(HP2200 Only).
4. The vehicle’s battery may be below 1.2V, the minimum start voltage for the
jumpstarter. Ensure all connections are correct, then press the OVER RIDE button,
to manually activate the jumpstarter. Refer to page 7 (“Vehicle Jumpstarting
Instructions, Step 5”) for further information.
5. Ensure the vehicle being jumpstarted does not require more than:
HP2012:
600 Amps Clamp Output
HP2200: 640 Amps Clamp Output at 12V OR
500 Amps Clamp Output at 24V.