21
2.5 POWER SUPPLY
The device foresees 2 operating modes (ADVANCED PROGRAMS) as a generator
stabilised at 6/12/24V:
– DIAGNOSTIC (fig. A.13);
– SUPPLY (fig. A.12).
On completing the selected process, disconnect the power cable from the mains
socket and disconnect the clamps from the battery terminals.
BUTTON LOCK.
It is possible to lock and unlock the setting by simultaneously
pressing and holding the“BATTERY VOLTAGE” (fig. A.21) and “CHARGE RATE”
(fig. A.23) buttons for 3 seconds, and (fig. A.2) (fig. A.4) “LOK on” and
“LOK off” will appear respectively on the display.
TO EXIT THE “ADVANCED PROGRAMS” MENU: Press and hold the “MODE” button
for 3 seconds.
BEEP
Info
Alarm
MODE
BATTERY
VOLTAGE
CHARGE
RATE
BATTERY
VOLTAGE
CHARGE
RATE
END OF PROCESS – EXAMPLE
ADVANCED MENU SELECTION
KEYBOARD LOCK
KEYBOARD UNLOCK
3"
BEEP
MENU
ADVANCED
PROGRAMS
3
DISPLAY
3
DISPLAY
BEEP
Info
Alarm
MODE
BATTERY
VOLTAGE
CHARGE
RATE
BATTERY
VOLTAGE
CHARGE
RATE
END OF PROCESS – EXAMPLE
ADVANCED MENU SELECTION
KEYBOARD LOCK
KEYBOARD UNLOCK
3"
BEEP
MENU
ADVANCED
PROGRAMS
3
DISPLAY
3
DISPLAY
