14
CHARGE COMBINATION CHART
2.2.2 CHARGE FUNCTION MODES
It is possible to store the last function modes, so they are immediately available
after any switching ON/OFF.
2.2.2.1 STORING PULSE-TRONIC CHARGE
Storage of voltage and type of battery, charge mode.
Procedure:
– Check that the charge clamps are not connected to a battery;
– Connect the power cable to the mains socket;
– Set the desired charge mode;
– Disconnect the power cable from the mains socket.
2.2.2.2 STORING SUPPLY/DIAGNOSTIC MODE
Storage of delivered voltage and current.
Procedure:
– Set the chosen mode and adjust the voltage/current values as required;
– Turn on the lock settings by pressing, at the same time, both keys
“BATTERY VOLTAGE” (fig.A.21) and “CHARGE RATE”(fig.A.23) for
3 seconds, on the display (fig.A.2)(fig.A. 4) will appear “LOK on.”
15Ah 100Ah 300Ah
►
15Ah 100Ah 300Ah
DISPLAY
80Ah
75Ah
70Ah
. . . . .
. . . . .
100Ah
95Ah
90Ah
CHARGE
RATE
MODE
BATTERY VOLTAGE
Ah SETTING – EXAMPLE
END OF CHARGE – EXAMPLE
Battery Type (T)
Battery Current (C)
AUTO
Auto
Auto Boost
Manual ‘Ah’
AUTO
i
Auto
Auto Boost
Manual ‘Ah’
WET, GEL, AGM, PdCa
Auto
Auto Boost
Manual ‘Ah’
