6
ASSEMBLY INSTRUCTIONS
(per fixture)
Hardware Used
Hardware Used
Assembly Instructions
1. Tighten mounting screws (CC) two full turns into holes in
mounting strip (BB) from the side of the preassembled
green ground screw.
2. Attach mounting strip (BB) to outlet box (not included)
using two outlet box screws (DD).
Helping Hint:
If necessary, attach copper ground wire to grounded
outlet box.
3. Strip 5/8 in. of insulation from wire ends. Twist
stripped ends together with pliers (not included), black
to black (power) and white to white (neutral). Snip
ends. Thread copper wire and ground wire to green
ground screw on mounting strip (BB).
1
2
3
4. Attach wire nuts (AA). Tape wire nuts (AA) and wires
together. Carefully tuck wires into outlet box.
4
BB
BB
CC
DD
Mounting
Strip x
1
Mounting Strip
x 1
Mounting Screw
x 2
Outlet Box Screw
x 2
Hardware Used
AA
Wire Nut
x 3
BB
CC
CC
DD
BB
AA
Green
Ground
Screw
