ProHD DR-N17F Скачать руководство пользователя страница 2

2

Safety Precautions

WARNING: 

TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPARATUS TO RAIN OR 

MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, 

SUCH AS VASES, SHALL BE PLACED ON THE 

APPARATUS.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit has 

been engineered and manufactured to assure your personal safety. 

But 

IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC 

SHOCK OR FIRE.

 In order not to defeat the safeguards incorporated 

into this product, observe the following basic rules for its installation, 

use, and service. Please read these “IMPORTANT SAFEGUARDS” 

carefully before use.

All the safety and operating instructions should be read before the 

product is operated.

The safety and operating instructions should be retained for future 

reference.

All warnings on the product and in the operating instructions 

should be adhered to.

All operating instructions should be followed.

Warning:

  This is a class A product. In a domestic environment this 

product may cause radio interference in which case the 

user may be required to take adequate measures.

Before connecting other products such as VCR’s and personal 

protection against electric shock.

Do not use attachments not recommended by the 

manufacturer as they may be hazardous.

When replacement parts are required,

 be sure the service 

manufacturer or equivalents. Unauthorized substitutions may 

Upon completion of any service or repairs to this product,

 

ask the service technician to perform safety checks to 

determine that the product is in proper operating condition.

Under the following conditions,

1.  Turn off the power.

2.  Unplug this product from the wall outlet.

3.  Refer service to qualified service personnel.

a) When the product emits smoke or unusual smell.
b) When the product exhibits a distinct change in performance

 —for example, no picture or no sound.

c)  If liquid has been spilled, or objects have fallen on the product.

d) If the product has been exposed to rain or water.
e) If the product has been dropped or damaged in any way.

f)  When the power supply cord or plug is damaged.

Do not install this product in the following places:

in a damp or dusty room

where the product is exposed to soot or steam, such as 

near the cooking counter or a humidifier 

near heat sources

where condensation easily occurs, such as near the window

in a location exposed to direct sunlight or strong light

Do not place this product on an unstable cart, stand, or table. 

The product may fall, causing serious injury to a child or adult, 

and serious damage to the product.

The product should be mounted according to the 

manufacturer’s instructions, and should use a mount 

recommended by the manufacturer.

Do not use this product near water.

Be sure to install the product in the place where proper 

temperature and humidity are kept (  “Operating conditions” 

on page 19).

This product becomes hot during its use. Take enough care 

when handling the product.

CAUTION:

  

To reduce the risk of electric shock. Do 

not remove cover (or back). No user 

serviceable parts inside. Refer servicing 

to qualified service personnel. 

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

The light

ning fl

ash with arrowhead 

symbol, within an equilateral triangle is 

intended to alert the user to the presence 

of uninsulated “dangerous voltage” 

within the product’s enclosure that may 

be of suf

cient magnitude to constitute a 

risk of electric shock to persons.  
The exclamation point within an 

equilateral triangle is intended to alert 

the user to the presence of important 

operating and maintenance (servicing) 

instructions in the literature 

accompanying the appliance.  

CAUTION

The power supply voltage rating of this product is AC 120 V(For U.S.A. and 

Canada) and AC 220 -240 V(For Europe and Asia).

The power cord attached conforms to the following power supply voltage 

and countries. Use only the power cord designated to ensure safety and 

EMC regulations of each country. 

Not all types of power cords are supplied to this product.

For U.S.A. and Canada: AC 120V      For Europe and Asia: AC 220-240V

 

This plug will fit only into a grounded power outlet. If you are unable to 

insert the plug into the outlet, contact your electrician to install the proper 

outlet. Do not defeat the safety purpose of the grounded plug.

This product should be operated only with the type of power source 

indicated on the label. If you are not sure of the type of power supply of 

your home, consult your product dealer or local electric power company.

POWER CONNECTION

Содержание DR-N17F

























Отзывы: