ProHD BR-DE900
HEVC and H.264 Decoding Appliance
User Manual, Version 1.0
35
Figure 4-6: The Decoder Settings Audio page
To set the Decoder parameters:
1.
From the main menu, select
Decoder Settings.
2.
Set the following parameters as required in each section and click
Apply.
Parameter
Description
Decoder Clock
Source
Select source clock either from:
Stream clock
Genlock input clock
(planned for next versions).
Decoder Buffer
(ms)
Type the decoder buffer value (0-1500ms). This parameter is used for
handling network jitter, allowing smooth playback. The bigger the buffer,
the higher the latency.
If staggering occurs, increase the buffer value until reaching a smooth
decoding.
The default buffer value should comply to most streams.