ProHD BR-DE900 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 53

ProHD BR-DE900 Скачать руководство пользователя страница 35

ProHD BR-DE900

HEVC and H.264 Decoding Appliance

User Manual, Version 1.0

34

To set Video parameters:

This section sets video output settings. Video outputs are split into two channels:

•

Primary Channel: SDI1/SDI2 (3G/HD/SD-SDI) and HDMI outputs can be configured.

•

Secondary Channel: SDI2 (SD-SDI) and Composite outputs can be configured.

NOTE

:

The Secondary channel is a downscaled version of the primary channel.

Parameter

Description

Output Resolution

(for each channel)

Select the required resolution from the drop-down list.

SDI1 / HDMI

SDI2 / Composite

Enable video outputs when the box is selected.
SDI2 can be configured as part of the Primary channel or
Secondary channel.

Display Format

Select the preferred display from the drop-down list.

Aspect Ratio

Select the aspect ratio from the drop-down list. When "Auto" is
selected the aspect ratio is determined according to the aspect
ratio of the incoming stream parameter (planned for next
versions).

To configure Audio Settings:

This section sets audio routing for:

•

SDI1/SDI2 and HDMI outputs

•

Digital AES 1 and 2 unbalanced outputs. It is possible to set if AES or S/PDIF format is
outputted (respectively Consumer or Professional).

•

Analog Balanced and Unbalanced audio outputs. The volume can be adjusted
independently for the audio analog balanced and unbalanced outputs.

«
...
33
34
35
36
37
...
»

Содержание BR-DE900






















































Отзывы:

Нет отзывов