24
LUBRICATION
BELT ADJUSTMENT
Before beginning a workout session ensure that the Safety Tether Key is properly placed onto the Computer Console and the
Safety Clip is securely attached to an article of your clothing. If you fall the clip will pull out the SAFETY TETHER KEY from the
Computer Console and the running belt will stop immediately for emergency stop, helping to prevent injury.
Replaced the Safety Tether Key onto the Computer Console. Press the START button to begin exercise again.
The running belt is pre-adjusted to the running deck at the factory, but after prolonged use it can stretch and
require readjustment. To adjust the belt, turn on the main power switch of the treadmill and let the belt run at a
speed of 8-10 KPH. Use the 6 mm Allen Wrench provided to turn the rear roller adjustment bolts in order to centre
the belt. If the running belt is shifting to the left, turn the left adjustment bolt 1/4 turn clockwise, and the running
belt should start to correct itself.
Tool:
Allen Wrench 6 mm
If the running belt is shifting to the right, then turn the right adjustment bolt 1/4 turn clockwise, and the belt should
start to correct itself. Keep turning the adjustment bolts until the running belt is properly centered.
EMERGENCY STOP
Lubricating under the running belt will ensure superior performance and extend its life expectancy. After the first
25 hours of use (or 2-3 months) apply some lubricant, and repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck. If the surface is slick to the touch, then
no further lubrication is required.
If the surface is dry to the touch, apply some lubricant.
How to apply lubricant
Lift one side of running belt.
Pour some lubricant under the centre of the running belt on the top surface of the running deck.
Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant. NOTE: DO NOT over lubricate
running deck. Any excess lubricant that comes out should be wiped off.
SAFETY TETHER KEY
