Progressive DRIFT CLASSIC, Руководство пользователя

Страница: 16 / 19

Step 11C: Attach the T Bracket to the headboard
Use at least two screws per T bracket to firmly attach to a secure part of your existing headboard. Due to the wide variety
of headboard thicknesses and materials, hardware for installing to existing headboards is not included. Please select a
screw or bolt that best suits your existing headboard.
Step 11D: Reposition the bed
1. While the Headboard Bracket assemblies are not fully tightened, command the bed to move its entire range of
motion while checking for any interference.
2. There must be no interference throughout the entire range of motion. Adjust the brackets if necessary.
3. Tighten all the hardware on the Headboard Bracket Mounts and T Brackets.
4. Once again, command the bed to move its entire range of motion while checking for contact.
Reset Procedure
Twin XL/Queen Configuration King/Split King Configuration
1. Unplug the system from the power
source.
2. Wait 60 seconds.
3. Plug back into power source.
4. Complete ‘Wireless Remote
Pairing’ – refer to the ‘Control
Guide’ section.
5. Reset Procedure is complete.
1. Unplug the system (both adjustable beds) from the power source.
2. Wait 60 seconds.
3. Plug back into power source.
4. Complete ‘Wireless Remote Pairing’ – refer to the ‘Control Guide’
section.
5. Remove the Wireless Remote battery cover and toggle the switch
to the ‘P’ position (in the middle of ‘A’ and ‘B’). Replace the
battery cover.
6. Press and hold the ‘FLAT’ button on the Wireless Remote until:
a. Both adjustable beds are in a completely flat position.
b. Both adjustable beds produce a BEEP sound.
c. Both adjustable beds may BEEP at the same time if they
reach the flat position at the same time. In this case,
simply hold the ‘FLAT’ button for another 5 seconds to
ensure Reset is completed.
7. Reset Procedure is complete.
Wireless Remote Pairing
NOTE: Each adjustable bed can be paired with 1 x Wireless Remote. Pairing new remotes will unpair previous remotes.
Head Up Leg Up
Within 30 seconds of powering the system, press and hold the Head Up button and Leg Up button on the Wireless
Remote until you hear a BEEP sound from the Control Box.
Cont Control Guide
P a g e | 16