Progress PI1327X, Руководство пользователя

Страница: 19 / 52

TROUBLESHOOTING
WARNING! Improper repair of
the appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that can
occur can be solved without the need
to contact an Authorised Service
Centre.
Refer to the below table for information on
possible problems.
With some problems, the dedicated
indicator flashes intermittently to indicate a
malfunction and the alarm code.
Problem and alarm code Possible cause and solution
You cannot activate the appliance. • Make sure that the mains plug is connected to
the mains socket.
• Make sure that there is no damaged fuse in the
fuse box.
The programme does not start. • Make sure that the appliance door is closed.
• Press the start button.
• If the delay start is set, cancel the setting or wait
for the end of the countdown.
• The appliance recharges the resin inside the
water softener. The duration of the procedure is
approximately 5 minutes.
The appliance does not fill with water.
• The indicator
flashes 1 time in‐
termittently.
• The light related to the start button
flashes continuously.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply
is not too low. For this information, contact your
local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not
clogged.
• Make sure that the inlet hose has no kinks or
bends.
The appliance does not drain the wa‐
ter.
• The indicator
flashes 2 times in‐
termittently.
• The light related to the start button
flashes continuously.
• Make sure that the sink spigot is not clogged.
• Make sure that the interior filter system is not
clogged.
• Make sure that the drain hose has no kinks or
bends.
The anti-flood device is on.
• The indicator
flashes 3 times in‐
termittently.
• The light related to the start button
flashes continuously.
• Close the water tap.
• Make sure that the appliance is correctly instal‐
led.
• Make sure the baskets are loaded as instructed
in the user manual.
Progress 19