Progress PCD41100X, Руководство пользователя

Страница: 10 / 24

heat inside the oven will continue to
cook.
– Use the residual heat to warm up
other foods.
• Residual heat
– In some oven functions if a
programme with time selection
(Duration, End, Time Delay) is
activated and the cooking time is
longer than 30 minutes, the heating
elements deactivate automatically
10% earlier. The lamp continues to
operate.
• Cooking with the lamp off -
deactivate the lamp during the cooking
and activate only when you need it.
• Keep food warm - if you want to use
the residual heat to keep the meal warm,
choose the lowest possible temperature
setting. The display shows the residual
heat temperature.
CLOCK FUNCTIONS
Clock functions table
Clock function Application
COUNT UP TIMER To set the count up, which shows how long the appliance
operates. This function has no effect on the operation of the
appliance.
TIME OF DAY To show the time of day. To change the time of day, refer to
"Setting the time".
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can use Dura-
tion and End at the same time (Time delay) if you want the
appliance to activate and deactivate automatically later.
Count Up Timer
The Count Up Timer is not
activated if Duration and End are
set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch .
2. Touch until the display shows
"00:00" and the Count Up Timer starts
to count up again.
Setting the DURATION
1. Activate the appliance and set an oven
function and temperature.
2.
Touch again and again until the
display shows .
flashes in the display.
3. Use or to set the minutes for
DURATION.
4.
Touch to confirm.
5. Use or to set the hours for
DURATION.
If you touch or while
you set the DURATION, the
appliance switches to the
setting of the END function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field or open the oven
door to stop the acoustic signal.
8. Deactivate the appliance.
10 Progress