Progress PBD35100X, Руководство пользователя, Страница: 31 / 36

Problem Possible cause Remedy
The oven does not heat up. The necessary settings are
not set. Make sure that the settings
are correct.
The oven does not heat up. The fuse is released. Make sure that the fuse is the
cause of the malfunction. If
the fuse releases again and
again, contact a qualified
electrician.
The display shows "12.00". There was a power cut. Reset the clock.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation set-
tle on the food and in the
cavity of the oven. You left the dish in the oven
for too long. Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
There is water inside the
oven. There is too much water in
the tank. Deactivate the oven and wipe
the water with a cloth or
sponge.
The indicator "Tank Full"
is off.
There is not enough water in
the tank. Fill the tank with water until
the indicator comes on. If
water starts to come out in-
side the oven, and the indica-
tor is still off, contact a quali-
fied service engineer.
The indicator "Tank Empty"
is on.
There is no water in the tank. Fill the tank. If the indicator is
still on, contact a qualified
service engineer.
The steam cooking does not
work. There is no water in the tank. Fill the water tank.
The steam cooking does not
work. Lime obstructs the hole. Check the steam inlet open-
ing. Remove the lime.
It takes more than three mi-
nutes to empty the water
tank or the water leaks from
the steam inlet opening. There are lime deposits in the
oven. Clean the water tank. Refer
to "Cleaning the water tank".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
Progress 31