background image

 3. Installing Your Fan

Tools Required

Phillips screw driver or straight slotted screw  

driver, adjustable wrench, step ladder, and 

wire cutters.

Mounting Options

If there isn’t an existing electrical box, then 

read the following instructions. Disconnect 

the power by removing fuses or turning off  

circuit breakers.
Secure the electrical box directly to the building 

structure. Use appropriate fasteners and 

building materials. The electrical box and 

its support must be able to fully support the 

moving weight of the fan (at least 35 lbs.).  

Do not use plastic electrical boxes.

Figures 1, 2, and 3 are examples of different 

ways to mount the electrical box.

Note:  You  may  need  a  longer  downrod  to  

maintain proper blade clearance when installing 

on a steep, sloped ceiling. The maximum 

angle allowable is 30˚. If the canopy touches 

downrod, remove the decorative canopy 

bottom cover and turn the canopy 180˚ before  

attaching the canopy to the mounting plate.

To  hang  your  fan  where  there  is  an  existing 

fixture  but  no  ceiling  joist,  you  may  need  an 

installation hanger bar as shown in Figure 4.

TO REDUCE THE RISK OF FIRE, ELECTRIC 

SHOCK OR PERSONAL INJURY, MOUNT 

TO OUTLET BOX MARKED “ACCEPTABLE 

FOR FAN SUPPORT OF 35LBS. (15.9 KG) OR 

LESS”, AND USE SCREWS PROVIDED WITH 

THE OUTLET BOX. ELECTRICAL BOXES 

COMMONLY USED FOR THE SUPPORT 

OF LIGHTING FIXTURES MAY NOT BE 

ACCEPTABLE FOR FAN SUPPORT AND 

MAY NEED TO  BE REPLACED. CONSULT A 

QUALIFIED ELECTRICIAN IF IN DOUBT.

Figure 1

Figure 2

Figure 4

Figure 3

Содержание AirPro P2576





























Отзывы: