6
·
User manual | Weather Station
Sensor configuration
The sensor, with analogue output, acts by delivering a current and a voltage proportional
to what it measures. The format indicates the sensor units and the relationship between the
voltage read by the input and the sensor reading values.
To configure the sensors of the weather station, go to:
•
Function | Settings | Sensors | Analogue
Depending on the controller, once in and for each of the sensors, configure the data according
to the following tables.
ANALOGUE SENSORS
Configuration
of the analogue sensors in Agrónic 2500
Sensor
Number
Sensor
Number
Input
(1)
Number
Input
(2)
Time
voltage
(2)
Number
Format
Voltage
(Vdc)
Temperature
1
00001
30101
500 ms
1
12 Vdc
Humidity
2
00002
30102
500 ms
4
Anemometer
3
00201
30103
2 s
5
Wind vane
4
00202
30201
2 s
16
Solar radiation
5
00203
30202
250 ms
2
Connections
The box has a series of connectors prepared and identified to screw in their respective sensors.
The connector layout is as follows:
LEFT PROFILE
RIGHT PROFILE
1
Configure when the weather station is connected directly to the Agrónic 2500.
2
Configure in the Agrónic 2500 when the weather station is connected to the AgroBee-L 3MA modules.
