R-2364
Polígon Industrial, C/ de la Coma, 2 | 25243 El Palau d’Anglesola | Lleida | España
Tel. 973 32 04 29 | [email protected] | www.progres.es
Sistemes Electrònics Progrés, S.A.
Problem resolution
Maintenance
THE RAINFALL GAUGE DOES NOT COUNT OR ACCUMULATE ANY DATA
THE SENSOR(S) ARE NOT READING ANYTHING
• Check that the flange that protects the tipping container inside the rainfall gauge has been
cut. (P. 5)
For correct operation, some of the sensors require annual maintenance.
• Rainfall gauge
:
- Remove the leaf filter and remove any solids that may be clogging it.
- Clean the scoop, the funnel hole in the cone, and the drains in the base.
• Solar radiation
: It may be necessary to clean the top dome due to any dirt deposits. In this
case, clean with a damp cloth with water, alcohol or a non-abrasive product.
• Check that the sensors are well connected to the connection box. (P. 6)
TWO MODULES AGROBEE-L 3MA
Module 1
AgroBee-L 3MA
Module 2
AgroBee-L 3MA
In this special model, the connection with the two AgroBee-L 3MA modules is made directly
with two cables with connectors.
IMPORTANT
Maximum cable length between the station and AgroBee-L 3MA:
50 m
(minimum section 0.5 mm
2
).
