Cleaning of Filter
Assembly & Cleaning
1).Pull the buckle on the right side of filter with one hand, and shift the bracket
out of the dustbin in left direction, refer to P3-7.
2).Pull out the filter upward, refer to P3-8.
3
)
.Put your fingers on the top of outlet window and pull it out emphatically, refer to P3-9.
4).Take out the sponge in the outlet window, refer to P3-10.
5).You can clean the filter and sponge with water, but remember to dry them
before assembly. It is advisable to clean them every 5 days.
Assembly
1).Inlet: Firstly, insert the filter into bracket, then push the bracket into dustbin.
2).Outlet: Firstly, put the sponge into outlet window, and then insert the window
to the dustbin. Press the two buckles beside to fix the window.
P3-8
P3-6
P3-7
P3-9
Assembly of Side Brush
P3-10
1).Release the screw with the cross screwdriver in the main shaft of side brush,
then pull the side brush out directly, refer to P3-11.
Assembly: Press the side brush against the main shaft and then fasten the
screw, refer to P3-12.
P3-11
P3-12
14