1.Make sure the plug is dry before power supply is connected.
2.After the power supply is connected, the
bidet seat
will
perform a
self-check, and
the “b
eep
” indicates that the self-check is completed and the toilet can be used
normally. At this time, the
control
knob lamp and the night light are always on.
3.Water temperature adjustment is enabled, and by default at low gear position: about 35
℃
.
4. S
eat temperature regulation is enabled, and by default at low gear position: about 33
℃
.
5. Af
ter the power supply is connected, the
control
knob light and night light are constantly on,
and the power
usage
is about 1 kWh/ month without enabling seat temperature heating.
Control Knob
Functions
Low
flow
High
flow
Low
flow
High
flow
Note: When the hip/ bidet cleaning function is used, please enable the maximum flow. If the
washing force is too large, adjust the amount of water through the
control
knob,
hence
reduc
ing
the washing force.
Lower body cleaning function (bidet washing)
The
control
knob is rotated by the vertical gear in the
specified direction
(
anticlockwise
)
.
After cold water is discharged at the front end
for
5
seconds, the lower body cleaning nozzle extends and
water is sprayed for cleaning.
The flow varies with the rotation of
the control
knob.
After
being
seated, the nozzle
will
automatically
close after 5 seconds of self-cleaning.
After rinsing is completed, the nozzle is
automatically closed after 2 seconds of self-cleaning.
Self-cleaning function
Standby mode
Hip cleaning function (hip wash)
The
control
knob is rotated by the vertical gear in the
specified direction (clockwise).
After cold water is discharged at the front end
for
5
seconds, the hip cleaning nozzle extends and water is
sprayed for cleaning.
The flow varies with the rotation of
the control
knob.
Breathing light
Breathing light will
flash when the
product is working
Bidet
Hip washing
STOP
Control
Knob
Method of Use - Control Knob Instructions
12
