ProGear Walk To Fit, Руководство пользователя

Страница: 14 / 27

Step 1
Place the treadmill in the upright position and then place one hand on the rear end
of Main Frame (1) and use your other hand to pull out the Spring Knob (23).
Lower the Main Frame (1) down from the rear of treadmill until the Spring Knob (23)
"pops" down into the locked position.
TO PREVENT INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN
SETTING DOWN THE DECK.
Remove four Stabilizer Knobs (32) and four Ø 21xØ 8.5x1.8t Washers (75) from the
right and left sides of the Stabilizer (57). Then install both Stabilizer Tubes (31) to
the Stabilizer (57) by inserting both Stabilizer Tubes (31) into the Stabilizer (57),
using four Stabilizer Knobs (32) and four Ø 21xØ 8.5x1.8t Washers (75) that were
removed.
ASSEMBLY
12