9
WARNING:
All wiring must be installed by a certified electrician
according to the electrical safety.
The heater must be grounded in accordance with all national and
local building codes.
All Wiring procedures and connections shall be in accordance
with the national and local codes having jurisdiction.
Before installation:
Disconnect the main supply connection.
The heater must be connected to individual branch circuit protected
by 65 Amp circuit breaker only.
Supply cables must be equipped with a dual pole circuit breaker
rating at least 240V 65A/pole as main cutoff switch of power
connection to the heater.
CAUTION
:
High temperature, risk of fire, keep electrical cords,
drapery, furnishings, and other combustibles at least 3 feet (0.9 m)
from the front of the heater and away from the side and rear.
WARNING:
To reduce the risk of fire, do not store or
use gasoline
or other flammable vapors and liquids in the vicinity of the heater.
INSTALLATION INSTRUCTION:
1. Keep the unit at least 6 feet (1.8m) away from the floor. This
minimum distance must be maintained.
2. Do not install closer than 4 feet (or 1.2 m) to any adjacent
vertical surfaces or walls.
3. Keep at least 4.5 inches (11.5cm) from the back wall (with or
without using the wall hanging mounting bracket).
4. Mark the drill-hole positions in the wall for the mounting bracket.
5. Drill the required holes with diameter fit for the anchor provided
for positioning the mounting bracket.
6. Insert the anchors.
7. Attach the mounting bracket to the wall and secure with
mounting screws.
INSTALLING INSTRUCTIONS
