12
WARNING -
The heater must be properly installed before it is
used.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR
ARC FLASH :
Apply appropriate personal protective equipment (PPE)
and follow safe electrical work practices. See NFPA 70E.
A circuit breaker must be installed and serviced only by
qualified electrical personnel.
Always use a properly rated voltage sensing device to
confirm power is off.
Switch the ON/OFF switch to ON position to turn on the heater.
Then turn the thermostat to the farthest clockwise position. The
fan should start and the unit begins heating the room,
and lamp
is light.
After the room reaches comfort level, turn the
thermostat counterclockwise until the heater shuts off. The
heater will automatically cycle around this preset temperature.
To increase the temperature, turn the thermostat knob
clockwise. To lower the temperature, turn the thermostat
counterclockwise.
Select a thermostat setting.
Ambient temperature is regulated by adjusting the thermostat to a
desired position. Allow the unit to operate and warm up the room.
When the desired temperature is reached, turn the control knob
counterclockwise until the heater turns off. This is your ideal
setting. The heater will start automatically when the room
temperature drops below this set point, and will turn off when the
set point is reached.
To turn off the heater, switch the ON/OFF switch to
OFF position.
OPERATING INSTRUCTIONS
