10
WARNING -
The heater must be properly installed before it is
used.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC
FLASH:
Apply appropriate personal
protective equipment (PPE) and
follow safe electrical work practices. See NFPA 70.
A circuit breaker must be installed
and serviced only by
qualified
electrical personnel.
Always use a properly rated
voltage sensing device to
confirm
power is off.
The Select switch on the heater is only for function
selection. Use circuit breaker as power ON/OFF device.
The circuit breaker is to be installed by a certified
electrician and shall be located in line of sight from the
heater location or shall be capable of being locked in
open position. Follow the operating instruction to
reduce the risk of fire, electric shock, injury or death to
persons.
Switch on the circuit breaker.
Insert the batteries to the remote controller as below images:
NOTE
: Remove the batteries if the remote control is not to be used
for a month or more. Batteries left in the unit may leak and cause
damage.
DO NOT MIX OLD AND NEW BATTERIES! DO NOT MIX
ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE
(NICKEL-CADMIUM) BATTERIES!
OPERATING INSTRUCTIONS
