1. parts
2. InsertIng rods Into speedrIng
3. attachIng Body, cover and then completed
• connect each rod B and rod a.
• Insert the other end of rod B into a hole in the speedring.
• the second rod should be inserted into the opposite of the first.
the third rod goes in diagonal position and the last one in the opposite of the third.
• skeleton of pancake is completed.
• cover the body over the skeleton.
• It might be neccessary to remove one rod to be able to fit the body.
• cover goes on top of the body.
• Zip it up as much as needed.
• each four side of cover can be open, rolled up and fixed using
attached velcro.
this product can be modified for better quality and function without prior notice
Lantern 3’ & 4’ flat manual
Lantern
Product no Description
a
46 40 95
rod a for hr lantern 3'
b
46 40 96
rod B 4-in-1 set for hr lantern 3'
c
46 41 73
translucent body for hr lantern 3'
d
46 41 74
Black cover for hr lantern 3'
e
46 40 97
rod a for hr lantern 4'
f
46 40 98
rod B 4-in-1 set for hr lantern 4'
g
46 41 75
translucent body for hr lantern 4'
h
46 41 76
Black cover for hr lantern 4'
b f
a e
c
g
d h