1. parts
2. InsertIng rods Into speedrIng
3. attachIng Body, cover and then completed
• connect each rod B and rod a.
• Insert the other end of rod B into a hole in the speedring.
• the second rod should be inserted into the opposite of the first.
the third rod goes in diagonal position and the last one in the opposite of the third.
• skeleton of pancake is completed.
• cover the body over the skeleton.
• cover goes on top of the body.
• Zip it up as much as needed.
• each four side of cover can be open, rolled up and fixed using
attached velcro.
this product can be modified for better quality and function without prior notice
Warning
- Maximum light wattage for this product is 500W
- Be aware that the road and speed ring will get hot and please
take precaution when touching these parts
Lantern 1,7’ flat manual
Lantern
Product no Description
a
46 40 89
rod a for hr lantern 1.7'
b
46 40 90
rod B 4-in-1 set for hr lantern 1.7'
c
46 41 71
translucent body for hr lantern 1.7'
d
46 41 72
Black cover for hr lantern 1.7'
a
b
c
d