7
3.
Press a 50mm Thick Square Inner Cap (11) into
each end of the Seat Frame (4).
Orient the Seat (7) as shown. Attach the Seat to
the Seat Frame (4) with two M6 x 16mm Screws
(17), an M6 x 63mm Screw (19), and an M6
Washer (23).
3
11
Wide
End
11
7
4
17
19
23
4.
Press two 1” Square Inner Caps (12) into each
Backrest Frame (6).
Orient the Backrest Frames (6) exactly as shown.
Attach the Adjustment Bracket (5) to the Backrest
Frames with four M10 x 44mm Bolts (15) and
four M10 Nylon Locknuts (20).
5.
Orient the Backrest (8) as shown. Attach the
Backrest to the Backrest Frames (6) with four M6
x 38mm Screws (21) and four M6 Washers (23).
Note: If the holes in the Backrest Frames do not
line up with the holes in the Backrest, go back to
assembly step 4, loosen the M10 Nylon Locknuts
(20), adjust the positions of the Backrest Frames,
and then retighten the Nylon Locknuts.
4
12
12
6
5
20
20
6
15
5
8
Wide
End
21
21
21
21
23
23
23
23
6
6
