1. With the help of a second person, carefully raise the
treadmill to the upright position. While the other person
tips the treadmill to one side and holds it, insert one of
the Extension Legs (34) into the treadmill as shown.
Make sure that the Base Pad (40) is on the indicated
side of the Extension Leg. Attach the Extension Leg
with an Extension Leg Screw (53).
Be sure to push on
the head of the Extension Leg Screw while tighten-
ing it.
Next, tip the treadmill to the other side and attach the
other Extension Leg (34) as described above. Lower the
side of the treadmill so that both Extension Legs are
resting flat on the floor.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor.
To decrease the possibility of
injury, bend your legs and keep your back straight.
Extension Leg Screw (53)Ð2
Handrail Washer (92)Ð2
Handrail Nut (91)Ð2
Handrail Bolt (90)Ð2
Latch Screw (35)Ð2
53
53
34
40
34
40
1
ASSEMBLY
Assembly requires two people.
Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Assembly requires the included allen wrench
and your own phillips screwdriver and two adjustable wrenches
(not included).
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
5
2
