background image

18

THE INFORMATION MODE

The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement, to select an audio trainer set-
ting, and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:  

The center of
the display will
show the total
number of hours
that the treadmill
has been oper-
ated. The lower
part of the dis-
play will show
the total number of miles or kilometers that the walking
belt has moved. In addition, an “E” for English miles or
an “M” for metric kilometers will appear in the lower part
of the display. To change the unit of measurement,
press the Speed increase button. 

The upper left part of the dis-
play will show the personal
trainer audio setting. If you
select “ON” as the audio set-
ting, the personal trainer will
guide you through your work-
outs and give detailed in-
structions. If you select the “OFF” setting, your per-
sonal trainer will simply guide you through your work-
outs. Press the Incline decrease button to change the
audio setting if desired.

You can adjust the volume
of the personal trainer
audio (0 through 5) by
pressing the Incline in-
crease button repeatedly.
The volume setting ap-
pears as the upper right digit in the display.

Note: The console features
a display demo mode, de-
signed to be used if the
treadmill is displayed in a
store. While the demo mode
is turned on, the console will
function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
is turned on, a “d” will appear in the display while the in-
formation mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.

To exit the information mode, remove the key from the
console.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor offers hands-free oper-
ation as it tracks your heart rate during your workouts.

To purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.

Содержание 775 CT PFTL72707.0

































Отзывы: