7
3. Identify the Right Upright (78) and the Right
Upright Spacer (79), which are marked with
stickers. Insert the Upright Wire (38) through the
Right Upright Spacer as shown. Set the Right
Upright Spacer on the Base (83).
Make sure
the Upright Wire is not pinched.
Have a second person hold the Right Upright
(78) near the Base (83).
See the inset drawing.
Tie the long tie in the Right Upright securely
around the end of the Upright Wire (38). Then,
pull the other end of the long tie until the Upright
Wire is routed completely through the Right
Upright.
83
38
78
79
38
3
2.
See the inset drawing.
Cut the plastic tie near
the Upright Wire (38).
Attach a Wheel (84) with a 3/8" x 2" Bolt (4) and
a 3/8" Nut (8).
Do not overtighten the Nut; the
Wheel must turn freely.
4
8
2
84
Long
Tie
78
38
1.
Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (56) so that the treadmill is more stable;
do not fully fold the Frame yet.
Cut the shipping tie securing the Upright Wire
(38) to the Base (83). Use a tie to pull the
Upright Wire out of the indicated hole.
Attach a Base Pad (81) to the Base (83) in the
location shown with a Base Pad Spacer (13) and
a #8 x 1" Tek Screw (2). Then, attach another
Base Pad (81) with only a #8 x 1" Tek Screw (2).
83
2
56
81
1
81
2
38
Hole
13
Long
Tie
Cut
38
Plastic Tie
