background image

45

15.3 PROBLEMS DURING CALLING:

• 

Beep tones during an intercom call:

 

You are called from outside during an intercom call; end this call, 

wait until the phone rings normally and answer the call.

• 

Beep tones during a call:

 

The batteries are nearly empty; disconnect the call and replace 

the handset onto the base or charger to recharge the batteries

• 

Noise and other distortions:

 

You are getting out of reach of the base station; reduce the 

distance.

 

There are other electrical devices in the vicinity that interfere with 

the radio waves of your phone; try another location.

15.4 PROBLEMS WITH CALLER IDENTIFICATION:

• 

You do not receive Name or Caller Identification information on the 

display:

 

Check whether your carrier transmits these signals (you shall 

subscribe to this service with some telephone companies).

• 

You do receive the numbers on the display of your phone, but not the 

name.

 

The carrier does not forward names; consult your carrier for this.

 

The name has not been programmed in the memory of your 

phone; program it. (see paragraph 7.3)

15.5 OTHER:

• 

The display stays blank:

 

The batteries are empty , please recharge them

• 

The handset does not have contact with the base station:

 

You are too far from the base station; reduce the distance.

 

The base station has been switched off. Check and repair it.

 

The handset is not registered with the base station (anymore); 

register it (again). (see paragraph 13.2)

Содержание PDX-2708



















































Отзывы: