PROFIX Vulcan Concept VZW750, Руководство по эксплуатации

Страница: 4 / 32

4
e) Power tools require maintenance. Check power tools for line causes property damage or may cause an electric shock.
concentricity or jamming of moving parts, any cracks and all
d ) Do not work materials containing asbestos. Asbestos is
other factors affecting the power tool work safety. If any
considered carcinogenic.
damage to the power tool is detected, it should be repaired
e) Keep your workplace clean and tidy. Material mixtures are
before use. Improper power tool maintenance is a reason for many
extremely dangerous. Light metal dusts can ignite or explode.
accidents.
f) Protect the object machined. Make sure all clamps are closed and
f) Cutting tools should be sharp and clean. Keeping sharp cutting
check for excessive clearance. It is safer to fix the object machined in a
edges in good condition reduces the risk of jamming and facilitates
fixing device or a vice than holding it in your hand.
operation.
g) Power tools, equipment, working tools etc. should be used
according to this user's manual taking into account
operating conditions and the work to be done.
Misusing a
power tool can result in dangerous situations.
h) At low temperatures and after a long brakes in operation it is
recommended to turn the power tool to operate it with no
load for a few minutes to provide proper grease distribution
inside its driving mechanism.
i) Use soft, damp (cannot be wet) cloth and soap to clean power
tools. Do not use petrol, solvents and other agents that may
damage your equipment
.
j) Power tools can be stored/carried after making sure that all
moving components are locked and protected against
release with original devices intended for this purpose.
k) Store power tools in a dry, dust and water-protected place.
l) Carry your power tool in its original packaging to provide
protection against mechanical damage.
WARNING! General warnings regarding the use of
power tools.
APPLICATIONS AND CONSTRUCTION:
Repair :
The drill is intended for drilling holes in wood, metal, plastics and
ceramics; its mode is used to drill in bricks, stone and concrete.
The tool is equipped with an electronic control system and right-
hand/left-hand operation switch and is also suitable for
tightening/undoing screws and threading.
It is absolutely prohibited to use the tool in other applications.
The drill is powered by a single-phase electric motor and is
intended for use in DIY. It is not suitable for heavy duty tasks.
It is prohibited to use the tool to carry out operations that
require using professional equipment.
Despite using the tool according to its intended application it is
impossible to eliminate certain residual risk factors. Considering the tool
WARNING! IMPACT DRILL, Additional Safety
construction the following risks may occur when operating the tool:
Warnings
- Touching the rotating drill bit with the hand, operator's clothes or
power cord.
Personal S afety :
- Burns when changing drill bits (Drill bits heat up intensely during a) Wear ear protectors with impact drills. Exposure to noise can
operation; use protective gloves when changing the drill bit).
cause hearing loss.
b ) Hold power tool by insulated gripping surfaces, when - Throwing back machined object or its fragment.
performing an operation where the cutting accessory may
- Bending/breaking the drill.
contact hidden wiring or its own cord. Cutting accessory
The set includes:
contacting a "live" wire may make exposed metal parts of the power
џ
drill - 1 piece
tool "live" and could give the operator an electric shock.
џ
Auxiliary handle - 1 piece
c ) Use appropriate detectors to determine if utility lines are
џ
Depth stop - 1 piece
hidden in the work area or call the local utility company for
џ
User's manual - 1 piece
assistance. Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion. Penetrating a water
џ
Warranty card - 1 piece
a) Power tools can be repaired by competent persons only who
use original spare parts.
It will provide safe operation for the power
tool.
b) If a fixed power cord is damaged, to avoid risks it should be
replaced by power tool manufacturer or in a specialty repair
shop or by a qualified person.
WARNING!
While operating power tools it is necessary to observe basic
work safety rules to avoid fire, electric shock or mechanical
injury.
g ) Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
h) Always hold firmly the power tool with your both hands
using both the main and auxiliary handle keeping a stable
position.
It is safer to control your power tool with both hands.
i) Turn the power tool immediately when the bit jams. Expect
intense vibrations that can result in a kickoff.
The bit jams
when the power tool is overloaded or is bent inside the object.
j) Always unplug the tool from the mains socket during breaks,
prior to changing bits, during repairs, cleaning or making
adjustments. Before you put the power tool aside make sure
it is completely stopped.
The bit can jam resulting in losing control
over the power tool.
k) Do not use a power tool with its power cord damaged. Do not
touch the power cord when damaged; in case of damaging
the power cord during operation unplug it from the mains.
Damaged power cords increase the risk of electric shock.
l) If the power cord is damaged, it must be replaced with a
special cord available from an authorized service center.
impact
impact
impact
–
I mpact
exclusively
n