Keep out of reach children. In order to keep children from the dangers of electrical
appliances, never leave them unsupervised with the machine. Consequently, when
selecting the location for your machine, do so in such a way that children do not have
access to the Machine. Children being supervised not to play with the appliance.
The appliance must only be mounted by an authorized specialist, paying attention to the
relevant regulations of the power supply companies and the regional construction
regulations.
The appliance shall not be used in building sites.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance
provided that it has been placed or installed in its intended normal operating position and
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children aged from 3 years and less than 8
years shall not plug in, regulate and clean the appliance or perform user
Pracautions for use
The light had better to be used under environmental temperature, better no lower than -
30 degree, no higher than 55 degree.
The light had better to be used in ventilated environments, not in an enclosed area, and
prohibited in high corrosion strength circumstances.
When find the light is abnormal, like twinkle, very dark, not light etc., please firstly invite
professionals to check if the wiring of the light is good, or feedback to our company
service directly.
High placement of lights shall be fastened or locked well to prevent the occurrence of
safety accidents.
Operation instruction
INSTALLATION DIRECION:
BEFORE ATTEMPING TO INSTALL UNITS, ENSURE POWER IS OFF, AND PLEASE PAY
ATTENTION TO FOLLOWING SETPS:
1.
MOUNTING PASITION: THE LED LIGHT CAN BE USED ON ALL SORTS OF PIPES, AS WELL AS
ON SOME UMBRELLA, TENT EQUIPMENT ETC. (Fig.1)
2.
FIXED THE LAMP ON THE PIPE, DIAMETRE OF Φ30 TO Φ53
，
AND TIGHTENED THE M8
SCREW.
（
Fig.2
）
3.
CONNECT THE MAINS WIRES.(Fig.3)
4.
PLS READ CAREFULLY
BOEORE INSTALLAION AND PRESERVEIT WELL. MUST BE INSTALLED AND ASSEMBLED BY
A QUALIFIED ELECTRICIAN.
BEFORE ATTEMPING TO INSTALL UNITS, ENSURE POWER IS OFF, AND PLEASE PAY
ATTENTION TO FOLLOWING SETPS.
LAMP TUBE FITTING (Fig.4)
UNSCREW THE BOLT AND OPEN THE GLASS HOLDER AFTER 30 MINUTES COOLING. THEN
FITTING TUBE INTO LAMP SOCKET. THEN KEEP THE WATERPROOF RUBBER PAD IN
ORIGINAL
