www.profitap.com
page 14
4. Unpacking and Installation
(cont.)
Installing SFP and SFP+ Connectors
No SFP or XFP are included unless ordered separately via your supplier.
Any SFP based Network Port at XX-32G must be equipped with a
standard Module to match the local requirements.
Any SFP+ based Monitor Port at XX-32G must be equipped with a
standard Module to match the local requirements.
Slide in the modules careful until it clicks and verify the proper seat.
Verifying the Installation
XX-32G’ functions depend on settings by the embedded Management
Application. The optimum configuration depends on kind of connections and equipment
being used for individual purposes.
You may continue with attaching the Network Links and/or the Monitoring appliances
according to requirements with or without powering on
XX-32G.
Attaching Links and Monitoring Appliances in operational mode (powered on) is assisted by
indicators at the front panel and at the connectivity
module.
Location of Indicators :
If powered up now, check the LED Indicators for proper power conditions and with the Link
LEDs on each connected port that the links are connected well and datatraffic is present.
It is recommended to continue in unplugged condition and follow this
manual up to Chapter 6 at first installation process before powering up.
Information
Field
Power
Link Activity/Speed
Systemstatus
