11
ProSear
Installation Instructions
Lighting Instruction
Lighting:
To light your grill, remove the dust cover. Turn knob to “High”. The grill has a 5 second de-
lay before beginning to light. You will hear a ticking sound. This is the igniter lighting the grill. After
the burner is lit, the ticking will stop. If the grill fails to light, the unit will retry 2 more times and after
the 3rd time if it fails, the unit will automatically shut “OFF” the gas to the burner and stop sparking.
The valve knob must be shut off before trying to light grill again. The electric spark device is reset by
turning the grill “Off”. The grill must remain OFF for 60 seconds in between lighting attempts so as not
to allow a build up of gas that will cause an unsafe situation. If after 3 attempts the grill fails to light,
contact the dealer you purchased your grill from, or a qualified service technician.
Relight & Safety Shut Off:
The
ProSear
Indoor Infrared Grill also includes a relight feature that will
begin trying to light the grill again if the flame were to be extinguished while in the “ON” position. If
the grill fails to light, the unit will retry 2 more times and after the 3rd time if it fails, the unit will auto-
matically shut “OFF”. The gas will be shut off to the burner and the sparking will stop. The valve knob
must be turned to the “Off” position to reset the spark device.
Preheat the grill on “High” for ten minutes before beginning to cook. After 10 minutes you can adjust
the grill temperature to suit the type of food you are cooking.
Do not cover the cooking surface with the dust cover, a lid, foil, cooking utensil or anything else. The
ProSear
Indoor Infrared Grill was designed to cook your food without covering it.
WARNING: Covering the cooking surface can cause an unsafe situation and can lead to seri-
ous injury or damage to personal property.
WARNING: Immediately after turning the grill on, all surfaces of the grill become extremely
hot. Do not touch any part of the grill except for the knob to adjust the cooking temperature
or to turn the grill off.
When you are done cooking, leave the grill on for an additional 10 minutes. This will cause your grill
to act like a self cleaning oven and carbonize any excess grease or food particles.
After the grill has cooled (Approx 30 Minutes) you can replace the dust cover.
