PROFIRE PID Operator Guide
PROFIRE
1.855.776.3473
[email protected]
Page 2 of 7
1.
Starting the System
Determining Run Status
If the UI is not running, the status light of the BMS (located in the top left corner of the enclosure
) will
be red. Additionally, on waking the system the appliance (in this case
Heater 1
) on the
System Overview
page will have a red indicator light as seen below.
Starting an appliance
If the system is not running, select the appliance using the
key. From the appliance
Status
screen, check
that there is no asterisk next to the
Alerts
tab (as pictured here:
). If there is an asterisk, navigate
to the
Alerts
tab and refer to the Alarms Manual or contact your supervisor.
Once it has been determined that the system is safe to run press the
key.
This dialog allows an operator to start one particular appliance, or all appliances.
After selecting
This Appliance
or
All Appliances
, the system will attempt to start.
