PROFILO PSP6U630, Инструкция по эксплуатации

Страница: 27 / 32

27
Disassembly
Fig.
19
‡
To re m ove the flexible hose, press the two catches
together and pull out the hose fro m the appliance's
suction opening.
Fig.
20*
a) Telescopic tube without accessory connection:
To release the connection, turn the handle slightly
and pull it out of the telescopic tool.
b) Telescopic tube with accessory connection:
To release the connection, press the locking collar
on the telescopic tube and and pull out the handle.
Fig.
21*
a) Nozzle without accessory connection:
To release the connection, turn the telescopic tube
slightly and pull it out of the floor nozzle.
b) Nozzle with accessory connection:
To release the connection, press the locking collar
and pull the telescopic tube out of the floor nozzle.
Cleaning and care
Emptying the dust separation system
Fig.
22
In order to achieve the best possible vacuu m ing re-
sults, the dust container should be e m ptied after every
use or, at the latest, when dust in the dust container
has reached the
m arking at any point.
!
Caution
The dust container can only be re m oved when the
appliance is in a horizontal position. Therefore,
place the appliance on the floor to unlock the re-
lease button.
Fig.
23
a) Press the release button and pull the dust container
out of the appliance using the handle.
b) Re m ove the lid fro m the dust container and e m pty
the dust container.
c) Put the lid back on the dust container.
d) Re m ove any dirt which m ay have been lodged under-
neath the container ejector opening.
e) Insert the dust container in the appliance, so that it
'clicks' audibly into place.
Maintaining the dust-collection system
Your appliance is equipped with a Sensor Control indi-
cator. This function constantly
m onitors whether your
vacuu m cleaner is working at its opti m u m power level.
Fig.
24
In normal operation
Fig.
24
The indicator (blue ring) flashes red when the foa m fil-
ter needs to be cleaned. The appliance is auto m atically
adjusted to the lowest power level.
Cleaning the foam filter
Switch off the appliance.
Fig.
25
a) Open the lid of the foa m filter by pulling on the lo-
cking lever.
b) Re m ove the filter cartridge with foa m filter using
the tab.
c) Re m ove the foa m filter fro m the filter cartridge and
tap out both parts.
d) If they are very dirty, the foa m filter and filter cart-
ridge should be cleaned under running water.
Alternatively, the unit can be cleaned in the
washing
m achine at m ax. 30 °C using a gentle pro-
gra mm e and the lowest spin speed.
TIP: To protect other laundry ite m s, put the filter
unit into a laundry bag.
e) Allow the foa m filter and filter cartridge to dry co m -
pletely (at least 24 hours) and then reinsert the foa m
filter into the filter cartridge.
f) Insert the filter cartridge with foa m filter back into
the appliance. Close the lid of the foa m filter.
!
Caution
The lid will only close if a filter has been inserted.
In the event of a fault
The Sensor Control indicator also flashes after the
foa
m filter has been cleaned:
Removing a blockage from the dust separation
Fig.
26
‡
Switch off the appliance.
a) Hold the appliance lid by the recessed handle and
open it.
b) Unlock the cover by turning it anti-clockwise, and
re
m ove it fro m the appliance.
> = Re m ove the blockage fro m the collecting unit.
c) Put the cover back on and lock it in place by turning
it clockwise.
> = Close the appliance lid.
If the Sensor Control indicator continues to flash red,
check whether the nozzle, suction pipe or flexible hose
are blocked. This can also trigger the Sensor Control
indicator.
Exhaust filter care
Depending on the m odel, your appliance is equipped
with either a HEPA filter
Fig.
27*
or a m icro filter
Fig.
28
.
Depending on the m odel, your appliance has additional
sound insulation behind the HEPA or m icro filter. This
does not have to be cleaned.
* depends on m odel