PROFILO PSP6U630, Инструкция по эксплуатации

Страница: 25 / 32

25
Congratulations on your purchase of the Profilo
PSP6U630 vacuu
m cleaner.
This instruction m anual describes various m odels, m e-
aning that so m e of the equip m ent features and func-
tions described m ay not be available on your m odel.
You should only use original Profilo accessories, which
have been specially developed for your vacuu
m clea-
ner, in order to achieve the best possible vacuu m ing
results.
Please keep this instruction m anual for future refe-
rence. When passing the vacuu m cleaner on to a third
party, also pass on this instruction m anual.
Fold out the picture pages.
Your vacuum cleaner
1 Adjustable floor tool* (For the sa m e functions, the
appearance of the nozzle m ay differ fro m the picture)
2 Telescopic tube with sliding switch but without acces-
sory connection*
3 Telescopic tube with adjusting sleeve and accessory
connection*
4 Flexible hose
5 Handle
6 Foa m filter
7 Parking aid on the back of the appliance
8 Exhaust filter lid
9 Power cord
10 Appliance lid
11 Foa m filter lid
12 On/off button with electronic suction regulator
13 Filter control display (Sensor Control)
14 Dust container with carrying handle
15 Storage aid on the underside of the appliance
16 Fluff filter cover
17 Professional upholstery nozzle*
18 Professional crevice nozzle*
19 Accessories holder*
20 Crevice nozzle
21 Upholstery nozzle
22 Brush ring (for fitting on the upholstery nozzle)*
23 Drill dust nozzle*
24 Hard-floor nozzle*
25 Hard-floor nozzle*
Before using your appliance for the first
time
Fig.
1
‡
Push the handle onto the flexible hose and lock it in
place.
Initial use
Fig.
2
‡
Push the flexible hose adapter into the air intake
opening on the appliance and lock it in place. You
will hear an audible 'click'.
Fig.
3*
a) Telescopic tube without accessory connection:
Push the handle into the telescopic tube.
b) Telescopic tube with accessory connection:
Push the handle into the telescopic tube until it
locks into place.
Fig.
4*
a) Nozzle without accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle.
b) Nozzle with accessory connection:
Push the telescopic tube into the connecting piece
of the floor nozzle until it locks in place.
Fig.
5*
‡
Unlock the telescopic tube by m oving the sliding
switch or adjusting sleeve in the direction of the ar-
row, and adjust it to the desired length. The slide
resistance on carpet is at its lowest when the tele-
scopic tube has been co
m pletely pulled out.
Fig.
6*
a) Place the accessories holder in the required positi-
on on the telescopic tube.
b) Use so m e pressure to insert the upholstery nozzle
with brush ring and the crevice nozzle into the ac-
cessories holder fro
m above or below.
Fig.
7
‡
Holding the power cord by the plug, pull it out to the
required length and insert the plug into the
m ains
socket.
Fig.
8
‡
To switch the vacuu m cleaner on or off, press the
ON/OFF button.
en
* depends on m odel