PROFILO PSI36101, Руководство пользователя

Страница: 9 / 16

9
PSI36101-001_v01
Filling the water tank
Set the steam regulator to the “0” position and
unplug the iron from the mains!
Use only clean water from the tap without mixing anything
with it. The addition of other liquids, such as perfume, will
damage the appliance.
Any damage caused by the use of the
aforementioned products, will make the
guarantee void.
Do not use condensation water from tumble dryers, air
conditionings or similar. This appliance has been designed
to use normal tap water.
To prolong the optimum steam function, mix tap water with
distilled water 1:1. If the tap water in your district is very hard,
mix tap water with distilled water 1:2.
To prevent spillage of water out of the appliance in vertical
position, never fill beyond the “max“ water level mark!
Getting ready
Remove any label or protective cover from the soleplate.
Ironing without steam
Set steam control to the “0” position.
Ironing with steam
Only when the temperature dial is placed in the areas with
the steam symbol.
Extra steam
Get extra steam by pressing the steam regulator for
maximum 2 seconds.
Spray
Do not use the spray function with silk.
Shot of steam
Set the temperature dial in the max position Interval between
shots of steam should be 5 sec.
Vertical steam
Do not iron clothing while it is being worn!
Never direct the steam at persons or animals!
Interval between shots should be 5 sec.
Wait 10 sec. after a cycle of 4 shot.
A
B
C
D
E
F
●
Store the iron in upright position.
●
Do not use descaling agents (unless they have been
advised by Profilo), they can damage the appliance.
●
Never use abrasive products to clean the soleplate or
any other part of the appliance.
●
To keep the soleplate smooth, you should avoid hard
contact with metal objects. Never use a scouring pad,
or chemicals to clean the soleplate.
SUGGESTION
Information on the product and
suggestions for its use
●
The iron is intended for domestic usage only and you
can use it solely according to herewith manual.
Before using the iron for the first time
1 With the iron unplugged, fill in the tank of the iron with
tap water and set the temperature dial to “max”.
2 Plug in the appliance to the mains. When the steam iron
has reached the desired temperature (pilot light switches
off), start steaming by setting the steam regulator to “2” and
by repeatedly pressing the button .
3
When using the steam function for the first time, do not
apply it on the laundry, as there could still be dirt in the steam
dispenser.
4 Your new iron may smell and give off some smoke when
you use it for the first time, this is normal and will cease after
a short while.
How to use the iron
1 Check the laundry care label for the required ironing
temperature. If you do not know what kind or kinds of fabric
an article is made of, determine the right ironing temperature
by ironing a part that will not be visible when you wear or use
the article.
2 Start ironing the articles that require the lowest ironing
temperature, such as those made of synthetic fibres.
3 Silk, woollen or synthetic materials: iron the reverse side
of the fabric to prevent shiny patches. Avoid using the spray
function to prevent stains.
● Synthetics
●● Silk – Wool
●●● Cotton – Linen
Technical data
The iron technical parameters are included at the name plate.