7
AP740
AP740
Full
Max
M in
M in
Max
0
12
50
50
250
250
1. 2k
80
1. 2k
80
12
Bass Boost
0
CH 1
CH 2
CH 3
CH 4
C H 1 / 2
C H 1 / 2
CH3/4
CH 3 /4
Crossover
Line In
Gain
Treble
Boost
Low Pass
Hi Pass
Line Out
CH 3
CH 4
90
150
M
OUNTING LOCATION
Before you start the installation, it will be necessary to find a mounting location for the
amplifier. Find a location in which the amplifier will receive adequate ventilation in order to
dissipate the heat it develops during operation. Two popular mounting locations are in the
trunk or under the seat.
Select the location in which you wish to mount the amplifier.
Use caution when mounting
the amplifier. There are many wires, gas lines, vacuum lines, brake lines as well as a gas tank
in the automobile. Make sure you know where they are when mounting the amplifier to avoid
puncturing lines, shorting wires or drilling holes in the gas tank.
Once you are ready, use a
pencil to mark the mounting holes in the bottom panel. After you have marked the locations of
the holes move amplifier out of the way and drill small starter holes to make the tapping
screws easier to install. Use provided screws to tighten down the amplifier.
