UK
TECHNICAL SPECIFICATIONS
• 220-240V ~ 50Hz
• Max. 800W Incandescent
• Max. 200W fluorescent lamps
• Reach : 7m
• Sensor : 120°
• Time adjustments: 10sec - 4min
• Not waterproof : IP20
• Light sensitivity control
• Power consumption: < 1W
IMPORTANT
WALK TEST
• Read this manual carefully.
• Keep the time switch out of the reach of children.
• This switch is for indoor use only.
• Always unplug the switch from the power outlet when you are cleaning it.
• Always clean it with a dry cloth.
• Do not use detergent or other chemicals when cleaning.
• This product is not suitable for TL lamps
When the power has been connected the sensor will warm up for 30 seconds (at most a min-
ute) then switch to AUTO MODE. In AUTO MODE you can carry out the loop test by setting the LUX
setting fully to the day position (sun) and the TIME setting to a minimum. As soon as the sensor
receives a valid signal (e.g. due to the movement of a person) within the detection angle the
connected light will switch on for the set time. You can set the detection angle by slowly walking
across the sensor field.
Art. : 840000021
